Amine value
In organic chemistry, amine value is a measure of the nitrogen content of an organic molecule.[1] Specifically, it is usually used to measure the amine content of amine functional compounds.[2] It may be defined as the number of milligrams of potassium hydroxide (KOH) equivalent to one gram of epoxy hardener resin. The units are thus mg KOH/g.
List of ASTM methods
[edit]There are a number of ASTM analytical test methods to determine amine value. A number of states in the United States have adopted their own test methods but they are based on ASTM methods.[3] Although there are similarities with the method it is not the same as an acid value.
- ASTM D2073 - This is a potentiometric method.[4]
- ASTM D2074-07
- ASTM D2896 - potentiometric method with perchloric acid.[5]
- ASTM D6979-03
First principles
[edit]The amine value is useful in helping determine the correct stoichiometry of a two component amine cure epoxy resin system.[6][7][8]
It is the number of Nitrogens x 56.1 (Mwt of KOH) x 1000 (convert to milligrams) divided by molecular mass of the amine functional compound. So using Tetraethylenepentamine (TEPA) as an example: Mwt = 189, number of nitrogen atoms = 5
So 5 x 1000 x 56.1/189 = 1484. So the Amine Value of TEPA = 1484
Other amines
[edit]All numbers are in units of mg KOH/g.
- Ethylenediamine. Amine value = 1870
- Diethylenetriamine. Amine value = 1634
- Triethylenetetramine. Amine value = 1537
- Aminoethylpiperazine. Amine value = 1305
- Isophorone diamine. Amine value = 660
- Hexamethylenediamine. Amine value = 967
- 1,2-Diaminocyclohexane. Amine value = 984
- 1,3-BAC. Amine value = 790
- 2-Methylpentamethylenediamine -Dytek A. Amine value = 967
- m-Xylylenediamine -MXDA. Amine value = 825
See also-related test methods
[edit]- Acid value
- Bromine number
- Epoxy value
- Hydroxyl value
- Iodine value
- Peroxide value
- Saponification value
References
[edit]- ^ Howarth, G.A (1995). "5". In Karsa, D.R; Davies, W.D (eds.). Waterborne Maintenance Systems for Concrete and Metal Structures. Vol. 165. Cambridge, U.K: The Royal Society of Chemistry. ISBN 0-85404-740-9.
- ^ Howarth, GA. Master of Science thesis "The synthesis of a legislation compliant corrosion protection paint system, based on waterborne epoxy, urethane and oxazolidine technology". April 1997 Imperial College London Chapter 1.9.5 page 29
- ^ "DETERMINING EPOXIDE EQUIVALENT AND AMINE VALUE OF RESINS" (PDF). Texas.gov.
- ^ "ASTM D2073 - Standard Test Methods for Total, Primary, Secondary, and Tertiary Amine Values of Fatty Amines, Amidoamines, and Diamines by Referee Potentiometric Method | Engineering360". standards.globalspec.com. Retrieved 2021-07-22.
- ^ "Epikure 3378 Technical Data Sheet" (PDF). Peninsula Polymers.
- ^ Jackson, M. A (October 1990). "Guidelines to formulation of waterborne epoxy primers". PPCJ Polymers, Paint and Colour Journal. 180: 608–617 – via DMG Events.
- ^ Howarth, Graham (1995-01-01). "The use of water‐based epoxies for anti‐corrosive primers". Pigment & Resin Technology. 24 (6): 3–6. doi:10.1108/eb043156. ISSN 0369-9420.
- ^ Howarth, GA. Master of Science thesis "The synthesis of a legislation compliant corrosion protection paint system, based on waterborne epoxy, urethane and oxazolidine technology". April 1997 Imperial College London Chapter 3.2.3 Amine stoichiometry page 56
Further reading
[edit]- "Amines | Introduction to Chemistry". courses.lumenlearning.com. Retrieved 2021-07-22.
- Epoxy resin technology. Paul F. Bruins, Polytechnic Institute of Brooklyn. New York: Interscience Publishers. 1968. ISBN 0-470-11390-1. OCLC 182890.
{{cite book}}: CS1 maint: others (link) - Flick, Ernest W. (1993). Epoxy resins, curing agents, compounds, and modifiers : an industrial guide. Park Ridge, NJ. ISBN 978-0-8155-1708-5. OCLC 915134542.
{{cite book}}: CS1 maint: location missing publisher (link) - Lee, Henry (1967). Handbook of epoxy resins. Kris Neville ([2nd, expanded work] ed.). New York: McGraw-Hill. ISBN 0-07-036997-6. OCLC 311631322.